Riding gloves

Riding glove 1.Synthetic Leather Palm 2.Spandex Back & Neoprene for Knuckle Protection 3.Spandex finger 4.Elastic Cuff

Riding glove

Model Number:rb-221

Feature: Stretch fabric back for flexibility and fit.

Synthietic leather palm adds durability & comfortable.

pading on the palm adds anti shock.

Spandex finger is for flexibility.

Neoprene knuckles allows for a better fit.

Elastic cuff keep debris out.

Wing closing strap for perfect adjustments and easy-on, easy-off.

Pakage:A plastic bag per pair,120pairs per carton(58*28*45)

Quantity/20FCL:4500dozens

Payment term:T/T(30%in advance,70%after shipment)

Application: Automotive/Oil industry/Mechanic/Heavy machine/Household

PVC Label and Silicon print

Embroidery

Digital heat transfer

CE standard

EN 388 Gloves giving protection from mechanical risks Protection against mechanical hazards is expressed by a pictogram followed byfour numbers (performance levels), each representing test performance against a specific hazard. 1 Resistance to abrasionBased on the number of cycles required to abrade through the sample glove (abrasion by sandpaper under a stipulated pressure). The protection factor is then indicated on a scale from 1 to 4 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove. See table below. 2 Blade cut resistanceBased on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 4. 3 Tear resistanceBased on the amount of force required to tear the sample.The protection factor is then indicated on a scale from 1 to 4. 4 Puncture resistanceBased on the amount of force required to pierce the sample with a standard sized point. The protection factor is then indicated on a scale from 1 to 4. If some of the results are markt with a X means that this test performance is not tested. If some of the results are markt with a O means that the glove did not pass the test.

Test Performance level 1 2 3 4 5 Abrasion resistance (cycles) 100 500 2000 8000 Blade cut resistance (factor) 1,2 2,5 5 10 20 Tear resistance (newton) 10 25 50 75 Puncture resistance (newton) 20 60 100 150

EN 420

This standard defines the general requirements for protective gloves in terms of construction, fitness of purpose, safety, etc

· The gloves themselves should not impose a risk or cause injury.

· The pH of the gloves should be as close as possible to neutral.

· Leather gloves should have a pH value between 3.5 – 9.5.

· The highest permitted value for chromium is 3 mg/kg (chrome VI).

· Specific details of any substance used in the glove which is known to cause allergies

· Sized by reference to an agreed common European hand size, for example minimum length.

Riding gloves